100Gbps 네트워크 성능 테스트 서버 사양
(요약)
성능측정 | 데이터 전송 | |
---|---|---|
CPU | 2.5GHz 이상 8코어 (보통 3.4Ghz 이상) | 2.5GHz 이상 12코어 |
Disk | NVMe PCIe 3.0 8 개 이상 |
(2023 구매 예정) 성능측정
- CPU : Intel Xeon Gold 6334 / 3세대 Xeon / 8C 16T 3.6Ghz (Turbo 3.7Ghz)
- MEM : 6 x 8GB DDR4 ECC/REG RAM (48G Total)
- NIC : Mellanox Connect X-5 or X-6
- 1U short case
- 가격 : 7백만원 (예상)
(2021 구매) 데이터 전송 노드
- CPU : Intel Xeon Gold 6246 ( 12C 24T, 3.3GHz, Turbo 4.20 GHz) x 2
- MEM : 16 x 12GB DDR4 ECC/REG RAM (192G Total)
- DISK : U.2 NVMe 2TB x 8 (PCIe Gen3 x4)
- NIC : Mellanox Connect X-5
- 가격 : 2.5천만원 (2021)
(미국) 100G PS
perfSONAR Node Reference Implementation
Current (~2021) 40/50/100Gbps Capable Design
The total cost of this server was around $4K in mid 2021. This system is being tested currently, and we be deployed to ESnet in early/mid 2022. Please note that specifics on configuration will be available after full evaluation.
Configuration Details
Hardware description
- Base System: Supermicro 5019P-WTR
- Onboard Dual 10GB RJ45
- Onboard VGA
- Redundant Power
- Onboard IPMI
- Motherboard: X11SPW-TF
- CPU: Intel Xeon Silver 4215R 8C 3.2Ghz
- Storage: 2 x Intel S4610 480GB SSD - 3 DWPD
- Memory: 6 x 8GB DDR4 ECC/REG RAM (48G Total)
- Network: Mellanox MCX556A-ECAT Dual Port Connect X5
System Block Diagram
https://fasterdata.es.net/performance-testing/perfsonar/perfsonar-node-reference-implementation/
(미국) 100G DTN
100G Experimental (~2018) DTN Design
If you wish to build a 100G DTN, here are the important hardware considerations:
- 100G NICs require PCIe Gen3 x16. If you are assuming all transfers are 4 or more parallel streams, any CPU with a clock rate greater than 2.5GHz should be fast enough to push 25Gbps per flow with the standard tuning applied.
- 100 Gbps (or 12.5 GBytes/sec) of disk IO is challenging.
Based on reports from colleagues, to get this much disk I/O you'll need either:
- 10 SSD NVME PCIe Gen 3 x4 drives (e.g.: Samsung 950 Pro with U.2 to M.2 2.5" adapters), or 8 high-end NVME PCIe Gen 3 x4 drives (e.g.: Intel DC P3700 with U.2, 2.5" version that has high endurance).
- 24 SSD SATA drives (with two PCIe Gen 3 x8 RAID controllers, or one PCIe Gen 3 x16 controller)
Note that both of these configurations will require a special chassis that can hold that many drives, such as:
- for nvme drives: https://www.supermicro.com/products/system/2u/2028/SYS-2028U-TN24R4T_.cfm
- for SATA drives: http://www.supermicro.com/products/chassis/2U/?chs=216
Sample drives that have been used for 100G DTNs include:
- SSD NVME drives:
- Samsung 950 Pro or Intel DC P3700
- SSD SATA drives:
- Samsung PM863 or SM863
https://fasterdata.es.net/science-dmz/DTN/100g-dtn/
Current (~2020) 40/50/100Gbps Capable DTN Design
The total cost of this server was around $21K in mid 2019. This system is being tested currently, and we be deployed to ESnet in mid/late 2020. Please note that specifics on configuration will be available after full evaluation. Note that this server uses VROC, and requires the purchase of a premium license.
Configuration Details
Hardware description
- Base System: Gigabyte R281-NO0 dual socket P 2U server
- Onboard: VGA, 2 x GbE RJ45 Intel i350, IPMI dedicated LAN
- 24 x front access U.2 hotswap bays
- 2 x rear access 2.5” SATA hotswap bays
Dual redundant hotswap 1600W PSU
- 2 x Intel Cascade lake Xeon Gold 6246
- 12 cores each
- 3.3GHz (Turbo 4.20 GHz) 165W TDP processor
- 12 x 16G DDR4 2933 ECC RDIMM (192G total)
- 10 x Intel P4610 1.6TB U.2/2.5” PCIe NVMe 3.0 x4 Drives (connect directly to CPU for VROC)
- 2 x Enterprise 960G 2.5“ SATA SSD (OS, onboard Intel SATA Raid 1)
- VIntel® Virtual RAID On CPU (VROC) RAID 0, 1, 10, 5
- Mellanox ConnectX-5 EN MCX516A-CCAT 40/50/100GbE dual-port QSFP28 NIC
https://fasterdata.es.net/science-dmz/DTN/reference-implementation/
(호주) AARnet SDMZ 100G DTN Servers
DTN With Low Storage/Benchmark Server
Hardware Supplier: SuperMicro
web site: http://www.supermicro.com/products/system/2u/2028/SYS-2028U-TN24R4T_.cfm
Model | Description | Quantity |
SYS-2028U-TN24R4T+ | SuperServer SYS-2028U-TN24R4T+ | 1 |
P4X-DPE52643V4-SR2P4 | CPU E5-2643V4 ( 6C 12T , 3.40 GHz , Turbo 3.70 GHz ) | 2 |
MEM-DR416L-SL06-ER24 | Samsung 16GB DDR4-2400 1R x 4 LP ECC REG RoHS | 8 |
HDS-2VM-SSDPE2MX012T4 | Intel P3500 1.2TB, NVMe PCIe 3.0, MLC 2.5" 20nm 0.3DWPD | 10 |
HDS-2TD-SSDSC2BB240G7 | Intel S3520 240GB, SATA 6Gb/s, 3D MLC 2.5" 7.0mm, up to 1DWPD | 2 |
SFT-OOB-LIC | OOB Management Package(per node license) | 1 |
EWCSC | SMC Warranty- 3 Years Parts & Labor with 1 Year advance replacement | 1 |
Network Card
Hardware Supplier: Mellanox
Web site: http://www.mellanox.com/page/products_dyn?product_family=260&mtag=connectx_5_en_card
Model | Description | Quantity |
MCX515A-CCAT | ConnectX®-5 EN network interface card, 100GbE single-port QSFP28, PCIe3.0 x16, tall bracket, ROHS R6 | 1 |
DTN with Mid Storage Server
Hardware Supplier: SuperMicro
web site: http://www.supermicro.com/products/system/2u/2028/SYS-2028U-TN24R4T_.cfm
Model | Description | Quantity |
SYS-2028U-TN24R4T+ | SuperServer SYS-2028U-TN24R4T+ | 1 |
P4X-DPE52643V4-SR2P4 | CPU E5-2643V4 ( 6C 12T , 3.40 GHz , Turbo 3.70 GHz ) | 2 |
MEM-DR416L-SL06-ER24 | Samsung 16GB DDR4-2400 1R x 4 LP ECC REG RoHS | 8 |
HDS-2VM-SSDPE2MX012T4 | Intel P3500 1.2TB, NVMe PCIe 3.0, MLC 2.5" 20nm 0.3DWPD | 24 |
HDS-2TD-SSDSC2BB240G7 | Intel S3520 240GB, SATA 6Gb/s, 3D MLC 2.5" 7.0mm, up to 1DWPD | 2 |
SFT-OOB-LIC | OOB Management Package(per node license) | 1 |
EWCSC | SMC Warranty- 3 Years Parts & Labor with 1 Year advance replacement | 1 |
Network Card
Hardware Supplier: Mellanox
Web site: http://www.mellanox.com/page/products_dyn?product_family=260&mtag=connectx_5_en_card
Model | Description | Quantity |
MCX515A-CCAT | ConnectX®-5 EN network interface card, 100GbE single-port QSFP28, PCIe3.0 x16, tall bracket, ROHS R6 | 1 |
https://support.aarnet.edu.au/hc/en-us/articles/115010092388-SDMZ-100G-DTN-Servers