1) Get Ubuntu 18.04 Cloud Image
2) Remove netplan & reboot
apt -y purge netplan.io reboot
3) Config network
- /etc/network/interfaces
- /etc/resolv.conf
4) Add repo
/etc/apt/sources.list.d/pnetlab.list
deb [trusted=yes] http://repo.pnetlab.com ./
5) Install PNETLab
apt update apt -y install pnetlab
6) Patch
sed -i '/skip_ssl/d' /etc/mysql/mysql.conf.d/mysqld.cnf echo "skip_ssl" >> /etc/mysql/mysql.conf.d/mysqld.cnf sed -i 's/Update-Package-Lists "1"/Update-Package-Lists "0"/g' /etc/apt/apt.conf.d/20auto-upgrades
7) Check network and configure
# brctl show bridge name bridge id STP enabled interfaces docker0 8000.024251d06cf7 no pnet0 8000.566f4bf80108 no eth0 pnet1 8000.566f4bf80109 no eth1 pnet2 8000.566f4bf8010a no eth2 pnet3 8000.000000000000 no pnet4 8000.000000000000 no pnet5 8000.000000000000 no pnet6 8000.000000000000 no pnet7 8000.000000000000 no pnet8 8000.000000000000 no pnet9 8000.000000000000 no pnet_nat 8000.000000000000 no
/etc/network/interfaces
# The primary network interface
iface eth0 inet manual
auto pnet0
# For DHCP Network
# iface pnet0 inet dhcp
# bridge_ports eth0
# bridge_stp off
# For Static Network
iface pnet0 inet static
address 192.168.0.10/24
gateway 192.168.0.1
bridge_ports eth0
bridge_stp off
# Cloud devices
iface eth1 inet manual
auto pnet1
iface pnet1 inet manual
bridge_ports eth1
bridge_stp off
...
iface eth9 inet manual
auto pnet9
iface pnet9 inet manual
bridge_ports eth9
bridge_stp off
8) Reboot